Vertical bands, static, or noise appear in the image. What should I do?

• If the projected image seems to contain electronic interference (noise) or static, try the following solutions:

  • Check the cables connecting your computer or video source to the projector. They should be:
    • Separated from the power cord to prevent interference
    • Securely connected at both ends
    • Not connected to an extension cable
  • If you adjusted the image shape, adjust the Sharpness setting in the Image menu.
  • Try adjusting the Noise Reduction or MPEG Noise Reduction setting in the Image menu.
  • Make sure you selected the correct Signal Format or EDID settings in the projector's Signal I/O menu, if available for your image source.
  • Select a computer video resolution and refresh rate that are compatible with the projector.
  • If you adjusted the image shape using the projector controls, try decreasing the Sharpness setting to improve image quality.
  • If you connected an extension power cable, try projecting without it to see if it caused interference in the signal.
  • If you are using the USB Display function, turn off the Transfer layered window setting in the Epson USB Display Settings program on your computer.