The displayed image is not rectangular. What should I do?

• If the projected image is not evenly rectangular, try the following solutions:

  • Place the projector directly in front of the center of the screen, facing it squarely, if possible.
  • If you are mounting the projector from the ceiling, use the adjustment controls on the mount at the time of installation.
  • Adjust the image shape using the Geometry Correction menu settings (Menu > Installation > Geometry Correction).
  • Adjust the H/V-Keystone setting to correct the image shape.
  • Adjust the Quick Corner setting to correct the image shape.
  • Adjust the Point Correction setting to correct slight distortion that affects a portion of the screen.
  Related concepts
  
  • Projector Placement
  Related tasks
  
  • Correcting Image Shape with H/V-Keystone
  • Correcting Image Shape with Quick Corner
  • Correcting Image Shape with Point Correction