Can I brighten the image when I project a 4K HDR signal?

• Yes, try the following:

  • Position the projector close enough to the screen.
  • Remove any light from the room.
  • Press the Color Mode button on the remote control to try different color modes for the image and environment.
  • Press the HDR button on the remote control, then press Enter to select the Dynamic Range setting and set it to either HLG or HDR10/HDR10+.
  • Make sure you selected the correct Dynamic Range setting in the projector's Signal I/O menu.
  • Turn on Dynamic Tone Mapping from the projector's Image menu to optimize contrast settings based on image brightness for HDR content.
  • Adjust the available settings in the projector's Image menu for the current input source such as Brightness, Contrast, Tint, Color Saturation and RGBCMY