The displayed image is not rectangular. What should I do?

• If the projected image is not evenly rectangular, try the following solutions:

  • Place the projector directly in front of the center of the screen, facing it squarely, if possible.
  • If you are mounting the projector from the ceiling, use the adjustment controls on the mount at the time of installation.
  • Adjust the image shape using the Geometry Correction menu settings.
  • Adjust the H/V-Keystone setting to correct the image shape.
  • Adjust the Quick Corner setting to correct the image shape.
  • Adjust the Curved Surface setting to adjust the corners and sides of an image projected on a curved surface.
  • Adjust the Corner Wall setting to correct the image shape projected on a curved surface with right angles.
  • Adjust the Point Correction setting to correct slight distortion that affects a portion of the screen.
  • If the projected image is bowed in the middle or the sides, then the projection surface is not flat. This type of distortion cannot be corrected from the projector's settings.