How can I improve the image quality?

• Check the following:

  • Make sure you select the best Color Mode for your picture and viewing environment, then use the settings in the Image menu to finish adjusting the picture.
  • If the projected image is fuzzy or blurry, adjust the image focus.
  • Make sure the projector is placed at the proper distance from the screen. Use the Projection Distance Calculator to determine how far to place the projector from the screen.
  • Turn on the Dynamic Contrast and Auto Contrast Enhancement settings in the projector's Image menu.
  • Adjust the Sharpness, Brightness, Contrast, and Color Saturation settings in the Image menu.

   

  • You can use the Frame Interpolation setting to smooth fast-moving video by comparing consecutive image frames and inserting an intermediate image from between them.

   

  • If you are projecting from a computer, adjust the computer's resolution to match the projector's native resolution, if possible.

  • To optimize the color tone according to the scene and to make the image more vivid, correct the image by adjusting the Scene Adaptive Gamma setting.
  • If you are projecting low-resolution images, you can use the Super-resolution setting to sharpen blurry edges.
  • Make sure you reduce the amount of ambient light in the room to comfortably view the projected image.
  • You can use the Panel Alignment setting to manually adjust the color convergence (the alignment of the red and blue colors) in the projected image.