How do I use the projector as a Bluetooth speaker?
-
You can use the projector's speakers to output audio from a compatible device connected by Bluetooth.
- Turn on the projector and display an image.
- Press the projector settings button on the remote control.
- Select Bluetooth Speaker Mode and press Enter.
The Bluetooth Speaker Mode screen is displayed and the projected image turns off after 10 seconds.
- Enable the Bluetooth function on the device you want to connect and select EPSON Projector from the available device list. See the documentation supplied with the device for more information.
Note:
- You can change the name EPSON Projector. Select another name or use a custom name from the projector's Device name menu.
- System > About > Device name
- To cancel a Bluetooth connection, disconnect from the connected device.
- You can change the name EPSON Projector. Select another name or use a custom name from the projector's Device name menu.
- Press and hold the esc button for two seconds to exit Bluetooth Speaker Mode.
Note:
- There is a delay in the audio output from any Bluetooth audio device.
- You cannot connect multiple video/audio devices by Bluetooth at the same time.
- You can also connect the projector to Bluetooth audio devices, such as speakers or headphones, to output the projector's audio from these devices. Select Remotes & Accessories > Pair accessory to perform pairing.
- You may not be able to connect depending on the standard and type of device.
- Even when connecting within the specified communication distance, connections can be lost due to the status of the signal.
- The communication method for Bluetooth uses the same frequency (2.4 GHz) as wireless LAN (IEEE802.11b/g) or microwave ovens. Therefore, if these devices are used at the same time, radio wave interference may occur, the audio may be interrupted, or communication may not be possible. If you do need to use these devices at the same time, make sure there is enough distance between them and the Bluetooth device.
- Bluetooth audio devices are not supported in some countries and regions.
Published: 31-Oct-2024
Was this helpful? Thank you for the feedback!