I see a No Signal message. What should I do?

• Try the following:

  • Make sure you selected the correct source. Press the source button on the remote control or on the control box to change the source.
  • Make sure you are using a supported signal resolution. The native resolutions of the different dvLED display models are as follows:
    • LE-C1135/LE-C1162: 1920 × 1080, 60Hz
    • LE-C14K135: 3840 × 2160, 60Hz
  • Check your HDMI cable. Make sure it is securely connected at both ends. Try testing with a different cable. If you are using a cable longer than 10 ft (3 m), test with a shorter cable.
  • If you are displaying from a computer, make sure it is set up to display on an external monitor.
  • If necessary, turn the dvLED display and the connected computer or video source off and then on again.
  • Connect the video source directly to the dvLED display.