Can I connect my product to my wireless network using the buttons on the control panel?

• Yes. See the instructions below.

  Selecting Wireless Network Settings From the Control Panel

  You can select or change wireless network settings using your product control panel.

  To install your product on a wireless network, follow the instructions on the Start Here sheet and install the necessary software. The installer program guides you through network setup.

  Note: Breakdown or repair of this product may cause loss of fax and network data and settings. Epson is not responsible for backing up or recovering data and settings during or after the warranty period. We recommend that you make your own backup or print out your fax and network data and settings.

  1. Press the  home button, if necessary.
  2. Select Setup.
  3. Select Network Settings.
  4. Select Wi-Fi Setup. You see this screen:
     

     

  5. Select Wi-Fi Setup Wizard.

     Note: If you need to disable the wireless network to set up your product on an Ethernet network, scroll down and select Disable Wi-Fi instead. Then follow the instructions on changing to a wired network connection in this manual.

  6. Select the name of your wireless network or enter the name manually.

     Note: To enter the wireless network name manually, select Other Networks, then select the Network (SSID) field. Use the displayed keypad to enter your network name.

  7. Select the Password field, and enter your wireless password using the displayed keypad.
  8. Press when you’re finished entering your password, then select Proceed.
  9. Confirm the displayed network settings and select OK to save them.

     Note: If you need to change a setting, press the  back button.

  10. If you want to print a network setup report, press one of the buttons. (Otherwise, select Done.) If the network connection is successful, the Wi-Fi icon in the upper-right corner of the LCD screen is lit as shown.

      

  Related tasks
  Entering Characters on the LCD Screen