text.skipToContent text.skipToNavigation
Home Support Projectors PowerLite Series Epson PowerLite Home Cinema 5040UB

How do I project an image from my iOS or Android device?

    Do one of the following:

    • Use the Epson iProjection app to project an image via wireless connection. See the setup instructions below for your device type.
    • Connect your projector and the device using an MHL cable adapter and an HDMI cable, or an MHL-to-HDMI cable (PowerLite Home Cinema 5040UBe only).

      Note: You must use the WirelessHD transmitter to set up an MHL connection (PowerLite Home Cinema 5040UBe only). Make sure to connect the cable to the HDMI4 port on the WirelessHD transmitter.

    Note: You must install the optional Epson 802.11b/g/n wireless LAN module and set up your projector for wireless projection. If the wireless LAN module is not included with the projector, you can purchase it from the Epson Store. If your projector is connected to a wired local area network (LAN) with a 100Base-TX or 10Base-T network cable and the network includes a wireless access point, the wireless LAN module is not needed.

    Related tasks
    Connecting the WirelessHD Transmitter
    Viewing WirelessHD Content
Published:  12-Sep-2016 Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address