-
Store
Buy Direct
-
Printers
Printers
- Home & Home Office
- Office Printers & Copiers
- Professional Imaging
- Label Printers & Presses
Office Printers & CopiersResourcesApplicationsProfessional ImagingLabel Printers & Presses - Ink
-
Projectors
Business & EducationLarge Venue
-
Scanners
Scanners
-
Point of Sale
Point of Sale
- Receipt Printers
- Label Printers
- Cheque Scanners & Validation Devices
- Kitchen Display Systems
Receipt PrintersResourcesApplicationsLabel PrintersResourcesApplicationsCheque Scanners & Validation DevicesResourcesApplicationsKitchen Display SystemsResourcesApplicationsSAT -
Robots
ProductsIndustries
- Industries
-
Support
Downloads not available on mobile devices.
Please select your operating system above.
** By downloading from this website, you are agreeing to abide by the terms and conditions of Epson's Software License Agreement.
- Top FAQs
- Connection or Setup
- Error Messages or Lights
- Image Quality or Appearance
- Maintenance
- Remote Control or Projector Buttons
- Software
- Sound
- Wireless or Wired Connection
- Other
- How do I connect my digital camera or other device to my product?
- Part of my image is blurred or out of focus. What should I do?
- The Power light will not turn on. What should I do?
- The product indicates an error. What should I do?
- How do I use the wireless projection feature?
- I connected my Windows computer to my product with a USB cable but did not get the option to install the USB Display driver. What should I do?
- How do I set up a wireless connection?
- When should I replace the projection lamp?
- How do I reset the lamp timer to zero?
- Can I view the image on my laptop or computer at the same time it is displayed on my product screen?
- Nothing projects on the screen. What should I do?
- How do I connect a monitor to my product so I can simultaneously view images on the monitor and from my product?
- How do I adjust my product settings for rear and/or ceiling placement?
- How do I connect my image source to my product?
- Can my product do rear projection?
- What type of equipment can I connect to my product?
- Can I connect my product to a network?
- How do I present image or movie files from an external drive or flash memory drive?
- Can I project images from a computer over a USB connection?
- How do I connect my digital camera or other device to my product?
- I can't connect to my product using EasyMP Network Projection. What should I do?
- Can I remove the wireless module and attach other USB devices to this USB port?
- How do I set up a wireless connection?
- My product is connected to my Mac with a USB cable, but nothing is projecting on the screen. What is wrong?
- I am unable to connect my Mac to my product. What should I do?
- Can I play and project images from a DVD movie with USB Display?
- I cannot get the wireless 802.11a configuration to connect to the wireless network.
- How can I connect my Tablet to my product?
- I'm having difficulty saving a static IP address on my product's Network Configuration screen. What is wrong?
- How do I connect my product?
- I connected my Sony PS3 to my product's HDMI port and I can't see the video displayed. I only hear the audio. What should I do?
- I am setting up my product wirelessly. The product's security setup menu does not allow me to enter a colon or space characters contained in my wireless network passphrase. What should I do?
- I am using Cisco VPN AnyConnect for Mac and cannot connect to my product using the EPSON EasyMP Network Projection Software v2.77, what is wrong?
- I see the message No Signal. What should I do?
- The message Not Supported is displayed. What should I do?
- The Power light will not turn on. What should I do?
- The product indicates an error. What should I do?
- When I try to install the USB Display driver, I see the message Inadequate Permissions. What should I do?
- When I try to enter Quick Connect (Ad Hoc) Mode using iProjection, the message Password Protected appears. What should I do?
- The message Do you want to keep blocking this program? appears when I try to connect using the EasyMP Network Projection software in Windows XP Service Pack 2. What should I do?
- When I try to access the Network Configuration menu, my product displays the message, Protected by Password. Enter Password to use projector. What should I do?
- The product powers on when the lights in the room are turned on. What should I do?
- The EasyMP screen displays the following message: Obtaining an IP address, then displays a 169.254.xxx.xxx IP address when configuring my product wirelessly. What should I do?
- Part of my image is blurred or out of focus. What should I do?
- The image is not rectangular. What should I do?
- I see static or noise in the image. What should I do?
- Only part of the picture is displayed or the image looks distorted. What should I do?
- My displayed image appear jittery or shaky when I connect a DVD player or VCR to my product. What should I do?
- The image is too dark or light, or the colors are incorrect. What should I do?
- My image has a blue cast when I connect my video equipment to my product with a VGA connection. What should I do?
- How soon should I see an image after I press the Power button?
- How can I improve the image quality?
- How can I adjust the colors?
- How do I select the image source?
- Can I display on the screen and a computer monitor simultaneously?
- Can I view the image on my laptop or computer at the same time it is displayed on my product screen?
- I can't play movies from my computer on my product. What should I do?
- I see only a black screen when I connect an HD video device to my product through an AV receiver using an HDMI cable. What should I do?
- How do I adjust the color for multiple projectors that are projecting from the same source?
- How do I project video clips?
- The image from my computer appears stretched when it's projected. What should I do?
- When I play movies through my DVD player and my product, the screen has a green cast. What should I do?
- When I browse through the image files on my USB drive, some of the .jpg files have an icon rather than the thumbnail preview. What should I do?
- The image from the projector is too big for a 16:9 screen. What should I do?
- How do I set the User's Logo to display when there is no signal?
- Images saved on the flash drive are not playing in correct order on the slide show. What is wrong?
- A black box appears where a video should appear when I project from my computer. What should I do?
- How do I replace the lamp?
- When and how should I clean or replace the air filter?
- How do I reset the lamp timer to zero?
- How do I get a replacement lamp for my product?
- How and when should I clean the lens?
- When should I replace the projection lamp?
- Can I access the lamp and air filter with the ceiling mount installed?
- How do I clean my product case?
- What is the storage life for an lamp?
- The remote control doesn't work. What should I do?
- Can I use the remote control to click through slideshow-style presentations?
- Can I use the USB Type B port for both the USB display feature and remote mouse operation at the same time?
- The Page Up or Page Down buttons do not work on the remote control when I use the USB Display feature. What should I do?
- The remote control doesn't work as a wireless mouse. What should I do?
- How do I obtain a replacement remote control?
- Can I use the remote control to enter IP addresses directly?
- How do I set a password on my product?
- Can I access my product from different operating systems on the same network?
- Can my product be viewed via the Network Neighborhood on a Windows computer?
- What is the EasyMP Monitor software?
- EasyMP Network Projection shows my product, but an error occurs when I try to connect and send video to my product. What should I do?
- Is the USB Display feature supported on a Mac?
- I connected my Windows computer to my product with a USB cable but did not get the option to install the USB Display driver. What should I do?
- When I convert a PowerPoint presentation to a JPG image with my product's PC Free Slideshow feature the slides do not display in the proper order. What should I do?
- I am unable to rename my product in EasyMP Monitor because the field to rename it is grayed out. How do I rename my product?
- I installed EasyMP Monitor v4.52 on Windows 7 and copied the EMP Monitor.DAT file from my Windows XP to the Windows 7 system. The previously registered products do not appear in EasyMP Monitor v4.52. What is wrong?
- When I present with the Epson Network Projection software, my presentation gets interrupted by another user connecting to the product. How can I block the other users from disconnecting my session?
- How do I install the USB Display on my product?
- Can the Epson EMP-Monitor utility control non-Epson projectors on the network?
- There is no sound. What should I do?
- How do I play sound through my product?
- How do I increase the performance of external speakers connected to my product?
- I do not get audio when multiple projectors are connected through the EasyMP Network Projection software. I do get audio when only one projector is connected. What is wrong?
- The product's buttons don't work. What should I do?
- I entered the wrong password three times and now my product's operation is locked. What should I do?
- The product won't go into sleep mode. What should I do?
- Is there a recommended sequence of turning on my product and peripherals?
- How should I transport my product?
- I forgot my product's password. What should I do?
- What are the different Color Modes on the Video menu used for?
- Can I connect my product to external speakers?
- What accessories are available for my product?
- Does my product offer network monitoring and control capabilities?
- Can I change my product's network name?
- Which wireless security modes does my product support?
- How do I use the wireless projection feature?
- Can my product access any other network resources?
- Will any network module work when inserted in my product?
- Does my product have horizontal or vertical lens shift?
- I disabled the front and rear remote receiver sensors on my product, and disabled my product's buttons with product's locking feature. How do I enable the remote receiver sensors again?
- What video resolutions are supported by USB Display?
- What is the maximum recommended USB cable length I can use to connect my product?
- Is my product compatible with the ELPDC06 Document Camera?
- My networked product is displaying an Event ID error code. What should I do?
- What is the recommended length for VGA cables?
- What is the RS232 command to retrieve my product's temperature status?
- Can my product output in high-definition?
- Is it possible to reset my product?
- How do I control my product remotely over a network?
- Is it okay to move my product right after I shut it down?
This document contains quick setup instructions for this product.
This document contains an overview of the product, specifications, basic and in-depth usage instructions, and information on using options.
This document contains information on how to use the Message Broadcasting plug-in with the EMP Monitor.
This Bulletin contains information regarding the Current projector models that support EMP Link21L Version 1.20 and the supported drivers.
This document contains projector and mount dimensional drawings in PDF format.
This Zip file contains the Microsoft Excel formatted ESC/VP21 Command List with command codes which are used to remotely control Epson projectors, along with the PDF Guide.
This document contains an overview and basic and in-depth usage instructions for EasyMP Network Projection.
This document will assist you with installation of the optional Universal Mount Assembly (ELPMBUNI)
This document contains information about using the network interface on a network.
This document contains an overview and basic and in-depth usage instructions for EasyMP Slide Converter.
This document contains an overview, and usage instructions for Epson Projector Management Utility (formerly named EasyMP Monitor Utility).
Guides for previous software versions are listed below.
Epson Projector Management v5.20 | v5.10 | v5.0
EasyMP Monitor Utility v4.57 | v4.56 | v4.54 | v4.53 | v4.52 | v4.51 | v4.50 | v4.40
This document gives an overview of the product as well as technical specifications, available options and warranty information.
This document provides complementary or late-breaking information to supplement your product documentation.
This document lists part numbers and descriptions for user replaceable parts.
This document contains quick setup instructions for this product , and your Epson America, Inc. Limited Warranty (warranty valid in the U.S. and Canada).
Service Centre Locator
For products in warranty, please contact Technical Support. If your product is out of warranty, find a service centre.
Find a LocationEmail Epson Support
If you are unable to find an answer on our web site, you can email your question to Epson Support.
Email UsContact Us
Phone :
(905) 709-3839
Hours :
Monday – Friday 7 am – 4 pm (PT)